An inclined placed Winder® series FRP membrane housing

Winder® Series FRP Membrane Housing with A Working Pressure 300–1200 PSI

Winder® series FRP membrane housings are mainly made of epoxy resin and fiber materials after special processing by automatic winding molding through computer control. It often works with RO membranes and is used in RO systems to remove pigments, hardness, high valence ions and other impurities, so that water after treatment can meet pure water standards.

Winder® series FRP membrane housings are widely used in RO water treatment systems. It has a working pressure ranging from 300 PSI to 1200 PSI. All our membrane housing have gone through burst pressure test at 6 times pf design pressure and 100,000 times of cycle tests, and have obtained ASME certification.

  • Specification
  • Video
Specification
An inclined placed 8 inch side port FRP membrane housing Winder® 8" – Side Port
Winder® 8" FRP Membrane Housing (Side Port)
Photo
8
8
Type 8" Side Port / 300–600 PSI 8"Side Port / 1000–1200 PSI
Model W80S300/450/600 W80S1000/1200
Design Pressure 300/450/600 PSI 1000/1200 PSI
Fatigue Test 100,000 times 100,000 times
Burst Pressure 6 times 6 times
Elements Quantity 1–7 1–7
Operating pH Range pH 3–10 pH 3–11
Design Temperature Range -10 °C to 66 °C (14 °F to 150°F) -10 °C to 66 °C (14 °F to 150 °F)
Feed/Concentration Port 1.5"/2"/2.5"/3" 1.5"/2"/2.5"/3"
Water Purification Port 1" 1"
End Cap Space aluminum; small thickness Space aluminum; large thickness
Fixing Stopper Stopper
Retaining Ring No Yes
An inclined placed 8 inch end port FRP membrane housing. Winder® 8" – End Port
Winder® 8" FRP Membrane Housing (End Port)
Photo
8
8
Type 8" End Port / 300–600 PSI 8" End Port / 1000–1200 PSI
Model W80E300/450/600 W80E1000/1200
Design Pressure 300/450/600 PSI 1000/1200 PSI
Fatigue Test 100,000 times 100,000 times
Burst Pressure 6 times 6 times
Elements Quantity 1–7 1–7
Operating pH Range pH 3–10 pH 3–10
Design Temperature Range -10 °C- to 66 °C (14 °F to 150 °F) -10 °C to 66 °C (14 °F to 150 °F)
Feed/Concentration Port 1.5" 1.5"
Water Purification Port 1" 1"
End Cap Space aluminum; small thickness Space aluminum; large thickness
Fixing Stopper Stopper
Retaining Ring No Yes
An inclined placed 4 inch side port FRP membrane housing Winder® 4" – Side Port
Winder® FRP Membrane Housing (Side Port)
Photo
4
4
Type 4" side port / 300–450 PSI 4" side port/ 600–1200 PSI
Model W40S300/450 W40S600/1000/1200
Design Pressure 300/450 PSI 600/1000/1200 PSI
Fatigue Test 100,000 times 100,000 times
Burst Pressure 6 times 6 times
Elements Quantity 1–4 1–4
Operating pH Range pH 3–11 pH 3–10
Design Temperature Range -10 °C to 66 °C (14 °F to 150 °F) -10 °C to 66 °C (14 °F to 150 °F)
Feed/Concentration Port 1" 1"
Water Purification Port 3/4" 1/2"
End Cap ABS Space aluminum
Fixing Crescent film Stopper
Retaining Ring No No
An inclined placed 4 inch end port FRP membrane housing Winder® 4" – End Port
Winder® FRP Membrane Housing (End Port)
Photo
4
4
Type 4" End Port / 300–450 PSI 4" End Port / 600–1200 PSI
Model W40E300/450 W40E600/1000/1200
Design Pressure 300/450 PSI 600/1000/1200 PSI
Fatigue Test 100,000 times 100,000 times
Burst Pressure 6 times 6 times
Elements Quantity 1–4 1–4
Operating pH Range pH 3–11 pH 3–10
Design Temperature Range -10 °C to 66 °C (14 °F to 150 °F) -10 °C to 66 °C (14 °F to 150 °F)
Feed/Concentration Port 3/4" 3/4"
Water Purification Port 1/2" 1/2"
End Cap ABS Space aluminum
Fixing Crescent film Stopper
Retaining Ring No No
An inclined placed 2.5 inch end port FRP membrane housing Winder® 2.5" – End Port
Winder® FRP Membrane Housing (End Port)
Photo
2.5
2.5
Type 2.5" End Port / 300 PSI 2.5" End Port / 1000 PSI
Model W25E300 W25E1000
Design Pressure 300 PSI 1000 PSI
Fatigue Test 100,000 times 100,000 times
Burst Pressure 6 times 6 times
Membrane model 2514, 2521, 2540 2514, 2521, 2540
Operating pH Range pH 3–11 pH 3–11
Design Temperature Range -10 °C to +66 °C (14°F to 150°F) -10 °C to +66 °C (14°F to 150°F)
Feed/Concentration Port 1/4" 1/4"
Water Purification Port 1/4" 1/4"
End Cap PP+30%PG SS2205
Fixing Crescent film Crescent film
Retaining Ring No No
An inclined placed quick opening FRP membrane housing Winder® Membrane Cleaning Housing
Membrane housing for membrane cleaning and components

One end of this RO membrane housing adopts quick release locking mechanism design to make the membrane installation and removal easier while meeting the operating pressure requirements of online cleaning.

One housing can only accommodate one membrane element, and is suitable for 8" membrane only. Only one person can easily remove and install the end cap within 1 minute, making its working efficiency 5 times higher than that of traditional designs.

An inclined placed DTRO FRP membrane housing Winder® – DTRO
A white DTRO series FRP membrane housing

DTRO FRP membrane housings are mainly used for treating land fills and landfill leachate. It has passed ASME certification and can withstand burst pressure test at 6 times pf design pressure and 100,000 times of cycle tests.

DTRO FRP membrane housing can withstand a pressure at 7.5/9.0/12.0/15.0/20.0 MPa.

DTRO FRP Membrane Housing
Pressure (MPa) 7.5 9.0 12.0 15.0 20.0
Length (mm) 945 1000 1150 1200 1250
Videos

8" 600 PSI FRP RO Membrane Housing Structures & Installation

8" 1200 PSI Side Port FRP Membrane Housing Structures & Installation

How to Install Multi Port High Pressure FRP Membrane Housing Properly?

Downloads

Here are product catalogue and data sheet for your reference. more information just contact us.

The nuonuo is answering the phone.
Interested?