HFSW1, HFSW2 Double Seal and HFSW4 high flow filter cartridges are displayed.

High Flow Filter Cartridges – Maximize Filter Cartridge Lifespan

The high flow filter cartridge is named because of the high flow rate brought by the large diameter. 60" high flow filter element can handle a flow rate of 45-60 m3/h, which can significantly reduce the number of filter elements and the size of the shell, prolong the service life, reduce the number of replacements, and reduce labor costs.

Usually, fine polypropylene or glass fiber is used as the filter material. It is widely used in water treatment applications, so it can be called high flow water filter cartridge.

There are HFSW1, HFSW2, HFSW3, HFSW4 types for your water treatment projects, just review and choose the best one.

  • Specification
  • Video
Specification
  • A piece of Pall high flow water filter cartridge are lying on the white background.

    HFSW1 type

  • A piece of Parker high flow water filter cartridge are lying on the white background.

    HFSW2 Double Seal

  • A piece of Parker high flow water filter cartridge are lying on the white background.

    HFSW3 Single Seal

  • A piece of 3M high flow water filter cartridge are lying on the white background.

    HFSW4 type

HFSW1 type

HFSW1 type high flow filter cartridge is constructed of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6 inches / 152 mm, with center tube and one-way opening. It is specially designed to flow the liquid from inside to outside to ensure that all contaminant particles are trapped inside the cartridge. The extra high flow design allows for a significant reduction in the number of cartridges and filters used in the same flow rate applications, greatly saving equipment input costs and labor costs.

A piece of Pall high flow water filter cartridge are lying on the white background.

Specifications

  • Product dimensions
    • OD: 6" (152 mm); ID: 3" (76 mm)
    • Length: 20", 40", 60"
  • Construction material
    • Media: PP
    • Cage/core/end cap: PP
    • Seal material: EPDM(Normal), Silicone rubber, fluororubber, NBR(Normal)
Table 1: Popular Specification of HFSW1 Type
Model Filter Rating (μm) Size Max. Flow Rating End Cap Note
HFSW1-20 1/5/10/25/50/100 20" (without core) 15 m³/h
A top cap of HFSW1 high flow filter cartridge.
 A bottom cap of HFSW1 high flow filter cartridge.
Max. pressure difference: 1.5 bar, < 80 °C
HFSW1-20C 1/5/10/25/50/100 20" (with core)
HFSW1-40 1/5/10/25/50/100 40" (without core) 30 m³/h
HFSW1-40C 1/5/10/25/50/100 40" (with core)
HFSW1-60 1/5/10/25/50/100 60" (without core) 45 m³/h
HFSW1-60C 1/5/10/25/50/100 60" (with core)

Benefits

  • Large effective filter area, low pressure drop and high flow.
  • Made of deep fine membrane material, its scientifically designed multi-layer gradient pore sizes enables the filter cartridge featuring high dirt holding capacity and reduced user costs.
  • Filter rating ranges from 1 μm to 100 μm to meet different filtration requirements. 20", 40" and 60" are available in length.

HFSW2 Double Seal

HFSW2 Double Seal high flow filter cartridge is a replacement cartridge for the depth filtration and other 2-1/2" diameter cartridges for the high flow applications, such as reverse osmosis pre-filtration and similar applications that nominal efficiency can meet corresponding requirements. The flow rate of 60" filter cartridge is as high as 60 m3/h, which significantly reduce the number of filter cartridges and housing dimensions.

The treatment capacity of a HFSW2 Double Seal filter cartridge is equivalent to that of 10 pcs filter cartridges with an outer diameter of 2-1/2" and a length of 40".

A piece of HFSW2 Double Seal high flow water filter cartridge are lying on the white background.

Specifications

  • Product dimensions
    • OD: 6" (152 mm)
    • ID: 100 mm
    • Length: 20", 40", 60"
  • Construction material
    • Media: PP
    • Cage/core/end cap: PP
    • Seal material: EPDM (Normal), Silicone rubber, fluororubber, NBR (Normal)
Table 1: Popular Specification of HFSW2 Double Seal Type
Model Filter Rating (μm) Size Max. Flow Rating End Cap Note
HFSW2-20C 1/5/10/15/20/40/70/100 20" (with core) 20 m³/h
A top cap of HFSW2 high flow filter cartridge.
A bottom cap of HFSW2 high flow filter cartridge.
Max. pressure difference: 1.2 bar, < 80 °C
HFSW2-40C 1/5/10/15/20/40/70/100 40" (with core) 40 m³/h
HFSW2-60C 1/5/10/15/20/40/70/100 60" (with core) 60 m³/h

Benefits

  • High dirt holding capacity, longer service life.
  • Less cartridge changes out to save the labor cost.
  • O-ring design causes no bypass to ensure the filtration efficiency.
  • Easy handling results in less manpower.
  • Wide chemical compatibility for different applications.

HFSW3 Single Seal

HFSW3 single seal high flow filter cartridge is a replacement cartridge for the depth filtration and other 2-1/2" diameter cartridges for the high flow applications, such as reverse osmosis pre-filtration and similar applications that nominal efficiency can meet corresponding requirements. The flow rate of 60" filter cartridge is as high as 60 m3/h, which significantly reduce the number of filter cartridges and housing dimensions.

The treatment capacity of a HFSW3 single seal filter cartridge is equivalent to that of 10 pcs filter cartridges with an outer diameter of 2-1/2" and a length of 40".

A piece of HFSW2 Double Seal high flow water filter cartridge are lying on the white background.

Specifications

  • Product dimensions
    • OD: 6" (152 mm)
    • ID: 110 mm
    • Length: 20", 40", 60"
  • Construction material
    • Media: PP
    • Cage/core/end cap: PP
    • Seal material: EPDM (Normal), Silicone rubber, fluororubber, NBR (Normal)
Table 1: Popular Specification of HFSW3 Single Seal Type
Model Filter Rating (μm) Size Max. Flow Rating End Cap Note
HFSW3-20C 1/5/10/15/20/40/70/100 20" (with core) 20 m³/h
A top cap of HFSW3 high flow filter cartridge.
A bottom cap of HFSW3 high flow filter cartridge.
Max. pressure difference: 1.2 bar, < 80 °C
HFSW3-40C 1/5/10/15/20/40/70/100 40" (with core) 40 m³/h
HFSW3-60C 1/5/10/15/20/40/70/100 60" (with core) 60 m³/h

Benefits

  • High dirt holding capacity, longer service life.
  • Less cartridge changes out to save the labor cost.
  • O-ring design causes no bypass to ensure the filtration efficiency.
  • Easy handling results in less manpower.
  • Wide chemical compatibility for different applications.

HFSW4 Type

High flow filter cartridge adopts high performance PP non-woven fabrics to optimize its filtration performance and fluid quality to ensure our customers' satisfaction. The filter cartridge adopts vertical pleats design to make the filter cartridge has a large effective filter area. Meltdown PP microfibers have strictly controlled fiber diameters to ensure its absolute filter rating. Pleating technology ensures the filter material is pleated in a more uniform way. The evenly distributed liquids in the whole filter material makes the full use of the filter area. In this design, we can ensure the filtration effect in a more compact and smaller space and its large inner diameter allows the flow of single 60" cartridge up to 45 m3/h.

A piece of HFSW4 high flow water filter cartridge are lying on the white background.

Benefits

  • Gradient pore size structure
  • When filtering water, the flow of a single cartridge is up to 15m3/h.
  • The size of the filter system can be reduced by 50%.
  • Filter cartridges are available in 20", 40" and 60" in length.
  • The outside to inside flow direction ensures all impurities are trapped outside the filter cartridge.

Specifications

  • Product dimensions
    • OD: Φ165 mm
    • ID: Φ85 mm
    • Length: 20", 40", 60"
  • Construction material
    • Media: PP
    • Cage/core/end cap: PP
    • Seal material: EPDM (Normal), Silicone rubber, fluororubber, NBR (Normal)
Table 1: Popular Specification of HFSW4 Type
Model Filter Rating (μm) Size Max. Flow Rating End Cap Note
HFSW4-20 1/5/10/15/20/25/40/60/70 20" (without core) 15 m³/h
 A top cap of HFSW4 high flow filter cartridge.
A bottom cap of HFSW4 high flow filter cartridge.
Max. pressure difference: 1.5 bar, < 80 °C
HFSW4-20C 1/5/10/15/20/25/40/60/70 20" (with core)
HFSW4-40 1/5/10/15/20/25/40/60/70 40" (without core) 30 m³/h
HFSW4-40C 1/5/10/15/20/25/40/60/70 40" (with core)
HFSW4-60 1/5/10/15/20/25/40/60/70 60" (without core) 45 m³/h
HFSW4-60C 1/5/10/15/20/25/40/60/70 60" (with core)
Videos
Downloads

Here are product catalogue and data sheet for your reference. more information just contact us.

The nuonuo is answering the phone.
Interested?