Depth Pleated Filter Cartridges – Maximize Filter Cartridge Lifespan

PES pleated filter cartridge

PES series filter cartridge is constructed of hydrophilic asymmetric PES membrane and non-woven fabric and woven nets as support layer by pleating. The cage, core and end cap are fabricated by thermal bond technology. No adhesives are used and the whole production process is finished in clean rooms. 100% integrity tests are performed and are washed by high purity water. It is suitable for filtering weak acid solutions, weak base solutions and high purity water.

Specifications

• Filtration rating: 0.1 μm, 0.2 μm, 0.45 μm
• Working temperature: <70 °C
• PH range: 1–14
• OD: φ68 mm or φ69 mm
• ID: φ32 mm
• Length: 10", 20", 30", 40"
• Construction material:
  • Media: asymmetric PES membrane
  • Support/drainage layer: PP
  • Cage/core/end cap: PP
• Max. operating temperature: 80 °C
• Max. operating differential pressure:
  • 4 bar @ 21 °C
  • 2.4 bar @ 80 °C
• Seal material: silicone rubber, ethylene propylene rubber, nitrile rubber, fluorine rubber, etc.

Features

• Asymmetric membrane structure.
• 100% filter cartridge integrity test.
• Good hydrophilic filter membrane, high flow, evenly distributed pores.
• Asymmetric membrane structure enhances the dirt holding capacity of the filter cartridge and extends its lifespan.
• No adhesive or surfactant is used to effectively reduce the risk of precipitation.

Application

• Pharmaceuticals
• Food & beverage
• Microelectronics
• Fine chemicals

Hydrophilic PTFE pleated filter cartridge

Hydrophilic PTFE pleated filter cartridge is constructed of hydrophilic PTFE membrane. It has excellent chemical compatibility and corrosion resistant capability. It can filter aqueous solutions without pre-wetting due to its hydrophilic nature, which greatly saves the operating time and cost.

Specifications

• Filtration rating: 0.1 μm, 0.2 μm, 0.45 μm
• OD: φ68 mm or φ69 mm
• ID: φ32 mm
• Length: 10", 20", 30", 40"
• Construction material:
  • Media: hydrophilic PTFE membrane
  • Support/drainage layer: PP
  • Cage/core/end cap: PP
  • Seal material: MVQ, EPDM, NBR, FPM, Teflon rubber, Teflon-coated FPM
• Working temperature: <70 °C
• Max. operating differential pressure:
  • 4 bar @ 21 °C
  • 2.4 bar @ 80 °C

Features

• PTFE membrane has great chemical compatibility and good tolerance to various feed liquids and can filter various strong corrosive liquids.
• It has good resistance to various chemicals and can be used to filter corrosive liquids such as etching and stripping liquids.
• PTFE membrane provides high filtration efficiency to ensure the removal of impurity particles.
• 100% filter cartridge integrity test

Application

• Pharmaceuticals
• Food & beverage
• Microelectronics
• Fine chemicals

Hydrophobic PTFE pleated filter cartridge

Hydrophobic PTFE filter cartridge is constructed of hydrophobic PTFE membrane to offer great chemical compatibility and corrosion resistant capability. It is suitable for filtering strong corrosive and oxidizing liquids and gases.

Specifications

• Filtration rating: 0.1 μm, 0.2 μm, 0.45 μm
• PH range: 1–14
• OD: φ68 mm or φ69 mm
• ID: φ32 mm
• Length: 10", 20", 30", 40"
• Construction material:
  • Media: Hydrophobic PTFE membrane
  • Support/drainage layer: PP
  • Cage/core/end cap: PP
  • Seal material: MVQ, EPDM, NBR, FPM, Teflon rubber, Teflon-coated FPM
• Working temperature: <70 °C
• Max. operating differential pressure:
  • 4 bar @ 21 °C
  • 2.4 bar @ 80 °C

Features

• PTFE membrane has great chemical compatibility and good tolerance to various feed liquids and can filter various strong corrosive liquids and gases.
• Good resistance to impact and back pressure, and can withstand repeated high temperature steam sterilization.
• Made of bonded PTFE and PP, no adhesive, clean and stable.
• Suitable for pharmaceutical industry with high requirements.

Application

• Sterile storage tank respirator, air fermentation tank filtration;
• Solvent filtration: various esters such as butyl acetate and ethyl acetate, and various alcohols such as acetone and dimethyl sulfoxide
• Sterilization and filtration of compressed air and nitrogen
• Suitable for pharmaceuticals, microelectronics, food & beverage, fine chemical, etc.

Nylon pleated filter cartridge

Nylon membrane filter cartridge takes nylon microfiltration membrane as filter material. We have 0.1 μm, 0.22 μm, 0.45 μm, 1 μm and 5 μm pore sizes for you to choose from. Thermal bond technology is adopted, no adhesives and no foreign matter falling off. Every filter cartridge must pass integrity test to ensure the stability of the product performance. In addition, nylon membrane filter cartridges are high quality and are available at an affordable price.

Specifications

• OD: φ68 mm or φ69 mm
• ID: φ32 mm
• Filter rating: 0.1 μm, 0.22 μm, 0.45 μm, 1 μm, 5 μm
• Construction materials:
  • Support/drainage: PP
  • Cage/core/end cap: PP
  • Seal method: Thermal bond
• Suitable for pharmaceuticals, microelectronics, food & beverage, fine chemical, etc.
• Effective filter area: ≥0.60 m²/10"
• Working temperature: <70°C
• Maximum differential pressure:
  • 4bar@21°C
  • 2.4bar@80°C
• Seal material: silicone rubber, ethylene propylene rubber, nitrile rubber, fluorine rubber, etc.

Features

• Nylon membrane is hydrophilic and no pre-wetting is required.
• Uniform pores and great flexibility can effectively ensure the retention capability of the filter cartridge to meet the application requirements of fine filtration.
• It has great chemical compatibility and is compatible with various chemical reagents, and can withstand 50% H₂O₂ and 6% bleaching agent.
• It features no fiber shedding and low precipitation matters and complies with the application requirements of pharmaceutical and chemical industries.

Application

• The filtration of electronics, microelectronics, semiconductors and other industrial water
• The filtration of solvent solutions
• The filtration of high purity chemical products
• The filtration of beer, mineral water and beverage