Centrifugal Pump – Using Centrifugal Force for Transporting Liquids

The CDLK/CDLKF submersible multistage centrifugal pump is a non-self-priming vertical submersible multistage centrifugal pump. The motor shaft is directly connected to the pump shaft via a coupling. Its impeller guide vanes are manufactured from stainless steel plate, formed and welded through stamping. To meet the installation depth requirements of pools or containers, a chamber can be installed to adjust the pump's immersion depth.

• Flow rate: 0.4 m³/h – 65 m³/h
• Head: 5 m – 305 m
• Temperature: -15 °C to + 105 °C
• Voltage: 220V/380V
• Material: Stainless steel

The CDMFG high temperature vertical multistage centrifugal pump, based on the structure of the CDMF light vertical multistage centrifugal pump, incorporates a cooling device, making it suitable for handling liquids with a maximum temperature of +180 °C. The liquid is cooled to +120 °C or lower before reaching the mechanical seal via the cooling device, effectively ensuring the safe operating temperature of the mechanical seal and preventing high-temperature damage to the motor.

• Flow rate: 0.5 m³/h – 29 m³/h
• Head: 4 m – 250 m
• Temperature: -15 °C to + 180 °C
• Max. Working Pressure: 25 bar

• Non-self-priming horizontal multistage centrifugal pump
• Impeller guide vanes are manufactured from stainless steel plate, formed and welded through stamping.
• Equipped with an extended shaft motor, featuring an axial inlet and a radial outlet.
• Flow rate: 0.5 m³/h – 32 m³/h
• Head: 6 m – 88 m
• Temperature: -15 °C to + 105 °C
• Voltage: 220V/380V
• Material: Stainless steel

The CM series are non-self-priming, light-duty, horizontal multistage centrifugal pumps, equipped with an extended shaft motor and a compact structure. Most components are manufactured through a stamping process, featuring energy saving, low headroom, environmental protection, aesthetic appearance, light weight, ease of installation and maintenance, and high reliability.

• Flow rate: 0.5 m³/h – 29 m³/h
• Head: 7.5 m – 58 m
• Temperature: -15 °C to + 105 °C
• Voltage: 220V/380V
• Max. Ambient Temperature: 40 °C
• Max. Working Pressure: 10 bar

• Non-self-priming horizontal multistage centrifugal pump
• Impeller guide vanes are manufactured from stainless steel plate, formed and welded through stamping.
• Equipped with an extended shaft motor, featuring an axial inlet and a radial outlet.
• Flow rate: 0.4 m³/h – 28 m³/h
• Head: 6 m – 60 m
• Temperature: -15 °C to + 105 °C
• Power: 0.25 kw – 4.4 kw
• Material: Stainless steel

The MS pump is a single-stage centrifugal pump with axial suction and radial discharge. It features a compact structure with the pump directly connected to the motor and installed coaxially. The main components are made from lightweight, thin stamped plates. With moderate corrosion resistance, the wetted parts are made of AISI304 or AISI316 stainless steel.

• Flow rate: 1.2 m³/h – 27 m³/h
• Head: 10 m – 40 m
• Temperature: -10 °C to + 85 °C
• Voltage: 220V/380V
• Material: Stainless steel

• Horizontal single-stage centrifugal pump with stainless steel construction.
• The pump casing is manufactured from a stainless steel plate through stamping and expansion welding process, making it a suitable replacement for traditional IS pumps and general corrosion-resistant pumps.
• Axial inlet and radial outlet.
• Flow rate: 3 m³/h – 200 m³/h
• Head: 8.8 m – 73.7 m
• Temperature: -20 °C to + 100 °C
• Voltage: 220V/380V
• Material: Stainless steel

• Non-self-priming, single-stage, horizontal, end-suction centrifugal pump.
• Features a back pull-out design, allowing maintenance without removing the pump body or pipeline.
• The NIS, NISO, and NISF series impellers are optimized with an enlarged, vortex-free inlet. This efficiently reduces the pump's required Net Positive Suction Head (NPSH), ensuring stable, low-noise operation. The performance curve is flat, offering a wide flow range and performance comparable to leading international pump brands.
• Flow rate: 1200 m³/h
• Head: 160 m
• Temperature: -15 °C to + 110 °C
• Voltage: 220V/380V
• Material: Stainless steel

A new generation of high-efficiency, non-self-priming, horizontal, single-stage, single-suction centrifugal pump, independently developed according to the latest European standard EN733. The product features a new hydraulic and structural design, achieving a minimum energy efficiency index of MEI ≥ 0.4.

• Flow rate: 625 m³/h
• Head: 163 m
• Max. Working Pressure: 16 bar
• Max. Power: 160 kw
• Temperature: -15 °C to + 110 °C
• Inlet Diameter: DN50–DN200
• Outlet Diameter: DN32–DN150

• Single-stage, horizontal fluoroplastic centrifugal pump with an extended motor shaft
• Axial inlet and radial outlet; the motor shaft is directly coupled to the impeller.
• All wetted components are made of fluoroplastics (F26, F46).
• Flow rate: 2.2 m³/h – 60 m³/h
• Head: 16 m – 52 m
• Temperature: -20 °C to + 120 °C
• Voltage: 220V/380V
• Material: FEP, PVDF, Cast iron