Multi-Channels Controllers Can Adjust Multiple Parameters

Display one parameter (MFC-1300) or 1.4 channels parameter (MCC-1300)
Master-slave dual serial port, Modbus RTU communication protocol
Downward RS485 bus and 4-20mA receiving port can accept one (MFC-1300) or less than four (MCC-1300) arbitrary measurement transmitter
Uplink serial port can connect any PLC, computer, and configuration of WlFl, Zigbee, 3g, GPRS wireless remote module
Store a variety of measurement units, can be selected from the screen
Two channels transmitting output, each channel supports 4–20mA output, metering mode, and transmitting model for selection
Three channels control output which could make each parameter over limit alarm control and Dl relation (one channel mechanical contact, two channels electron contact)
Panel mounted shell with full-sealed, IP65 protection level

Specification

Table 1: MFC-1200/MFC-1380 Technical Data
Communication	Master RS485 interface connect with DCS or server. Slave RS485 interface connect with kinds of digital sensors/transmitter
4-20mA Receiving	Connect with two channels 4–20mA transmitter
4-20mA Output	Output two channels 4–20mA signals
DI Input (Dry Contact)	Two channels DI input, Pull on the potential, photo-electric isolating, receiving level,pressure,Temp., leakage signals
Control Output	Mechanical contact	SPST*One channel, AC 220V @3A (max)
Control Output	Electronic contact	Semiconductor photoelectric switch*two channels, load capacity: 50mA (max) AD/DC 30V
Power Supply	DC 24V±4V
Working Environment	Temp.: (0–50) °C Relative Humidity: ≤ 85% RH (none condensation)
Storage Environment	Temp.: (-10 to +60) °C Relative Humidity: ≤ 85% RH (none condensation)
Protection Level	IP65
Dimension (L × W × H)	144 mm × 144 mm × 142 mm
Installation Method	Panel mounted