Bag Filter Housing Installation and Filter Bag Replacement

Bag filters are essential components used to ensure the quality and purity of water by effectively capturing suspended solids, sediments, and other impurities. Whether you are setting up a new water treatment system or maintaining an existing one, understanding the bag filter housing installation process and proper filter bag replacement techniques is crucial for efficient operation and optimal water quality.

Installation

Step 1

Clean the gasket and the hold down groove.

Step 1

Put the filter bag holder onto the filter bag neck ring and hold down the filter bag neck ring.

Step 1

Put the crescent fixing rings into the housing grooves and fix them with fastening screws.

Step 1

Connect the filter cover with the filter housing. Install pressure gauge connector and pressure gauge.

Filter Bag Replacement

1. Stop the water pump operating, close the inlet and outlet valve, open the drain valve and drain out all liquids in the filter housing.
2. Open the filter cover and take out the filter bag.
3. Clean all components in the bag filter housing.
4. Install new filter bags in accordance with the installation steps mentioned above.