Cartridge Filter Housing Installation and Filter Cartridge Replacement

Precision cartridge filters are essential components used to ensure the quality and purity of water by effectively capturing suspended solids, sediments, and other impurities. Whether you are setting up a new water treatment system or maintaining an existing one, understanding the cartridge filter housing installation process and proper filter bag replacement techniques is crucial for efficient operation and optimal water quality.

Installation

Step 1

Clean the gasket and the hold down groove.

Step 1

Insert the filter cartridge into the sealed tray to ensure there is no gap between the filter cartridge and the base.

Step 1

Put the upper hold down plate onto the filter cartridge and hold down the filter cartridges tightly.

Step 1

Connect the filter cover with the filter housing. Install pressure gauge connector and pressure gauge

Filter Cartridge Replacement

1. Stop the water pump operating, close the inlet and outlet valve, open the drain valve and drain out all liquids in the filter housing.
2. Open the filter cover and unscrew the hold down plate.
3. Take out the filter cartridge and clean all components in the bag filter housing.
4. Install new filter bags in accordance with the installation steps mentioned above.