Water Descaler Prevents Scale Buildup

Water descalers are devices used to prevent scale buildup and remove scale from water heaters, pipes, faucets, showers, and any equipment that water flows through. Hard water contains high levels of calcium and magnesium ions, which can combine with stearate ions to form magnesium stearate and calcium stearate. Both calcium stearate and magnesium stearate are insoluble in water. When water comes from areas with high calcium and magnesium ions, hard water can leave mineral deposits on pipes, faucets, showers, and appliances, commonly referred to as "scale". Descaling systems convert hard minerals in the water into ions that cannot crystallize, storing them in water as monomeric components, thereby preventing the formation of scale.

Specifications
Working Principle
Video

Specification

DPSE Anti-scale device
Whole House Water Descaler

Increase efficiency and reduce consumption. Reduce the energy consumption cost of equipment operation and save the operation cost.
Easy-to-install & maintenance-free. No addition, no maintenance
Long operation distance. Long operation distance, ≤ 5 kM
No magnetism and electricity. No magnetic field, no electromagnetic radiation, installation without external power supply
Environmentally friendly, chemical-free. Safe and environmentally friendly, no medicine and noemission
Easy installation. No power supply, hot melt joint configuration,convenient installation.

Specifications

Read MoreRead Less

Table 1: DPSE Anti-Scale Device
Product Model No.	CM001	CM002	CM003
Caliber	11/4"	11/4"	2"
Product Size	Φ 62 × 320	Φ 72 × 420	Φ 100 × 430
Product Weight	2500 g	3900 g	5800 g
Connection	Thread	Thread	Thread
Chamber Material	304 stainless steel	304 stainless steel	304 stainless steel
Pressure Level	≤ 150 LB	≤ 150 LB	≤ 150 LB
Flow Rate	8 T/H	10 T/H	20 T/H
Chip Diameter	50 mm	60 mm	88 mm
Chips Quantity	10	10	10
Water Source	Municipal water	Municipal water	Municipal water
Ambient Temp	≤ 100 °C	≤ 100 °C	≤ 100 °C
Minimum Flow Rate	1.45 T/H	2.26 T/H	3.53 T/H
Maximum Flow Rate	8 T/H	10 T/H	20 T/H
Average Flow Rate	5 T/H	8 T/H	12 T/H

Whole house water descaler and internal structure

Installed inline within pipework. Small footprint , no tanks required
24/7 operation. No backwashing or resin regeneration to interrupt treatment process
Uses no salt (sodium chloride) or other chemicals(potassium chloride). It doesn't need salt to soften water. This makes a salt-free water conditioner the best option for people-, which means no health concerns or environmental damage due to high salt water content.
Nothing is removed from water. Vital minerals for human health are maintained unlike with RO systems which is safe and healthy.

Specification

Product name: Whole House Water Descaler
Product model: WD001
Scaling principle: Pure physical ion polarization
Inlet & Outlet: DN20/DN25
Installation method: Horizontal or vertical
Water quality: Municipal tap water
Plumbing pipe: CPVC/PVC/PEX/copper/PPR
Applicable pressure: 0.15–1 MPa
Rating Flow rate: 4 m³/h
Minimum lifetime: 10 years
Product Size: 255 mm(L) Φ54 mm
Shipping weight: 1 kg (2.2 lbs) / unit

Application

Entire home plumbing. Remove existing scale (descale) within all pipes
Dishwashers. No more hard water spots on newly washed glassware and dishes
Water heaters, showers, thermostatic cartridges, taps. Disrupt the formation of limescale crystals on them

Working Principle

Hard water enters the stainless steel chamber.
The existing scale salt occurred "calcite" structure to "aragonite" structure transformation, help reduce scale build-up and minimize the mineral particles you may find on surfaces that water touches.
The minerals within the hard water begin to lose their scale producing properties due to changes in their molecular arrangement.
'Hard' minerals are changed from large molecules to inactive microscopic particles, which flow freely, unable to stick to surfaces and cause scaling.

Videos

Downloads

Here are product catalogue and data sheet for your reference. more information just contact us.